General Description; Scope Of Delivery; Overview; Function Description - Grizzly EHS710-69 R Notice D'utilisation Originale

UK
wet hedges.
The operator or user is responsible for ac-
cidents or damage to other people or their
property. The manufacturer is not liable for
damages caused by unspecified use or in-
correct operation.
Before use, check that the blades
are sharp. Ensure that the blades
are sharpened whenever blunt,
in order to avoid overstressing of
the machine. Damages caused by
cutting with blunt blades are not
covered by the guarantee.

General Description

See page 2 for illustrations.

Scope of delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Electric hedge trimmer
- Hand protection with installation ac-
cessories
- Blade protection
- Instruction Manual

Overview

1 Contact protection guard
2 Safety blade
3 Hand protection
4 Loop grip with deadman switch
5 Vents
6 Grip adjustment release
7 On/off switch
8 Tension relief
9 Five-position adjustable grip
10 Mains cable
11 Blade protection
108

Function Description

The electric hedge trimmer is driven by
an electronic motor. The equipment is
double-insulated for safety and does not
require earthing.
The hedge trimmer is equipped with a dou-
ble-sided safety cutter bar. When cutting,
the blades move backwards and forwards
in linear motion. The impact protection on
the tip of the cutter bar prevents unpleas-
ant recoils should the trimmer come into
contact with walls, fences and so on.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and briars.
Please note the following descriptions for
the function of the operating components.
Mounting the Hand
Protection
Pull out the power plug before carry-
ing out any work on the equipment.
Use only original parts.
1. Unpack the device and check it
for completeness.
2. Slide the hand protection onto
the equipment and affix the side
of the unit with the two bolts in-
cluded in delivery.

Operation

Do not use the equipment with-
out the hand guard. Wear suitable
clothing and work gloves when
working with the equipment.
Ensure that the equipment is
functional before each use. The
On/Off switch and the safety