Reconnecting To A Previously Connected Device; Recovering A Lost Connection; Disconnecting A Bluetooth Device; Clearing The Headset Pairing List - Bose A20 Aviation Headset Notice D'utilisation

Using the Headset

Reconnecting to a previously connected device

Each time you turn on the Bluetooth feature, the headset will attempt to reconnect
with the two most recently connected Bluetooth
Turn the headset on.
1.
Make sure the Bluetooth indicator is flashing blue. If not, press
2.
The indicator flashes blue.
To confirm connection, check the Bluetooth device list on your device.
3.

Recovering a lost connection

If a connected Bluetooth device moves out of range, the connection will be lost.
The headset will automatically attempt to reconnect.
If the headset is unable to reconnect, it will go back into pairing mode. After five
minutes of inactivity, the Bluetooth feature will turn off. Move the device back into
range, and press

Disconnecting a Bluetooth device

• On the headset, press and hold
off.
• On your device, turn the Bluetooth feature off.
• Move the Secondary Audio Mode selector to the OFF position.

Clearing the headset pairing list

With the Bluetooth feature on (Bluetooth indicator flashing), press and
hold and
pairing mode.

Controlling Bluetooth volume

Use the Bluetooth volume controls on the right side of the control module to
control the volume of a connected Bluetooth device.
Volume
up
Volume
down
• Each press increases or decreases the volume by one level.
• Press and hold the volume button to change the volume continuously.
24 - English
once to reconnect.
at the same time for seven seconds. The headset will return to
devices.
®
for 5 seconds to turn the Bluetooth feature
.