Publicité
Les langues disponibles
Les langues disponibles
the motor speed constant (and
under normal conditions the loco
speed), even when the load of the
loco changes, for example, in
curves or on grades. This feature
does not work at top speed,
because additional voltage must
be available to overcome any
added load.
If desired, numerous functions of
the onboard decoder, such as
acceleration, braking, direction of
travel and many others, can be
programmed using a PC and the
55045 MTS PC Decoder Pro-
gramming Module (see "Instruc-
tions for advanced users"). These
function can be programmed from
the 55015 Universal Remote as
well.
Lighting
This model features directional
lighting. The model has a "flat"
multi-purpose socket, with a
removable cover, on the rear of
the loco (Fig. 3). This socket can
be used to provide track power to
LGB cars with lighting or sound
electronics.
To remove the cover of the sock-
et, pull it straight out. If the cover
is tight, gently use a small straight
screwdriver to pry it out. (Do not
pull out the rectangular outer
housing.)
Power Supply
Attention! For safety and reliabil-
ity, operate this model with LGB
power supplies (transformers,
power packs and controls) only.
The use of non-LGB power sup-
plies will void your warranty.
Use this model with LGB power
supplies with an output of more
than 1 amp. For more information
on LGB power supplies for indoor,
outdoor and multi-train operation,
see the LGB catalog.
Attention! After extended opera-
tion, this model may leave carbon
dust or other debris around the
track. This dust and debris can
stain carpet and other materials.
Consider this when setting up
your layout. Ernst Paul Lehmann
Patentwerk and LGB of America
are not liable for any damages.
SERVICE
Do-It-Yourself Service Levels
Level
- Beginner
Level
- Intermediate
Level
- Advanced
Attention! Improper service will
void your warranty. For quality
service, contact your authorized
retailer or an LGB factory service
station (see Authorized Service).
Hint: Additional expert instruc-
tions for many LGB products are
available at www.lgb.com.
Lubrication
The axle bearings should be lubri-
cated occasionally with a small
amount of LGB Maintenance Oil
(50019).
Cleaning
This model can be cleaned exter-
nally using a mild detergent and
gentle stream of water. Do not
immerse this model.
Replacing the light bulbs
Lower lights: Pull the lantern
housing away from the model.
Remove and replace the bulb.
Reassemble.
Upper lights: Remove the ring
around the lantern lens. Carefully
pry the lens away from the
lantern. Using tweezers, remove
and replace the bulb. Reassem-
ble.
Cab
light:
remove and replace the bulb.
Replacing the traction tire
- Use a small, straight-blade
screwdriver to replace the trac-
tion tire:
- Pry the old traction tire out of the
wheel groove.
- Gently insert the new traction
tire into the wheel groove.
- Make sure that the traction tire is
seated properly in the wheel
groove.
Using
tweezers,
11
Publicité
