Signal Output - Wenglor SD4ICS0 SE89 Série Notice D'instructions

EN

8.2. Signal Output

The short-circuit proof signal output can be connected to a PLC, for example, for central displays or control
tasks.
DANGER!
• The signal output is not a safety-relevant output!
Input signal, magnet activation
IN
Normal sequence, door has been locked
OUT
Door could not be locked or error
OUT
Figure 3: Signal Output Performance
SPS/PLC
A1.0
E1.0
Mag = 1 = lock
Figure 4: Signal Output Evaluation
42
SD4I
Mag
Signal
Key
Lock
Unlock
Door open
Lock-out time (typical 100...150 ms, maximum: 1 s)
Door closed
Door locked
Door not locked or error
A1.0
&
M1.0
E1.0
A1.0
&
M2.0
E1.0
Door can be locked
Door is locked
Diagnostics