Operating Instructions; Function; Target Group; Product Overview - Wenglor SD4ICS0 SE89 Série Notice D'instructions

1. Operating Instructions

1.1. Function

This operating instructions manual provides all the information you need for the mounting, set-up and com-
missioning to ensure the safe operation and disassembly of the safety switchgear.
The operating instructions must be available in a legible condition and a complete version in the vicinity of
the device.

1.2. Target group

All operations described in this operating instructions manual must be carried out by trained specialist person-
nel, authorised by the plant operator only.
Please make sure that you have read and understood these operating instructions and that you know all
applicable legislations regarding occupational safety and accident prevention prior to installation and putting
the component into operation.
The machine builder must carefully select the harmonised standards to be complied with as well as other
technical specifications for the selection, mounting and integration of the components.

1.3. Product Overview

Latching
No
Permanent Magnet (typically 15 N)
Electrical Locking (typically 30...100 N)
Electrical Locking +
Permanent Magnet (typically 45...115 N)
Safety Interlocks electromagnetic / Safety Switch with interlocking function
Guard locking device monitored
SD4ICS01SE89
SD4ICS02SE89
SD4ICS03SE89
SD4ICS04SE89
Actuator monitored
–
–
SD4ICS13SE89
SD4ICS14SE89
25