Routine Maintenance; Extraordinary Maintenance; Manufacturer's Warranty - Bettio PICOSCENICA Manuel D'utilisation Et De Maintenance

If the resistance requirements necessary for safe fixing are not satisfied, increase the number of wall plugs and screws.
The screws and wall plugs also depend on the state and the nature of the structure, masonry/metal/wood window/door frame, onto which the
installation/fixing is to be carried out. Wall plugs and screws are not supplied with the product. Take care when handling the product: the winder
mechanisms are mounted with loaded springs. The instructions for installation are described on the sheet contained in the pack. Any sealing
must be done with neutral silicone resin.
The flyscreen must be closed when the wind speed reaches 20 km/h.
8. MAINTENANCE

8.1 Routine maintenance

Given the high quality of the materials used in making the flyscreen, no routine maintenance is envisaged other than cleaning the mesh to protect it
against the formation of mould/mildew caused by dust or other material being deposited on them. In addition, periodic cleaning prevents the buildup of
dust or other materials that may compromise the proper functioning of the product. The mesh must be visually inspected at least twice a year; a mesh
screen should be checked in spring before being used for the summer and in autumn before packing it up for the winter. The mesh may be cleaned with
a vacuum cleaner or with a sponge or cloth dampened with lukewarm water. Let the mesh dry thoroughly after cleaning before winding it up.Do NOT
use solvents, ammonia or hydrocarbons for cleaning.
CAUTION: cleaning carried out using steps, platforms or such must only be done by specialised personnel working in conformity with safety
regulations and who must use suitable personal protective equipment such as body harnesses with separate safety line (see Italian Legisla-
tive Decree 81/2008).

8.2 Extraordinary maintenance

CAUTION: only professionally qualified and trained personnel may carry out extraordinary maintenance: it is therefore necessary to request
the service of a specialist. If the flyscreen or any part of it needs to be dismantled, see the installation instructions. If the mesh is torn, how-
ever small the tear, it must be replaced.
Only use original spare parts otherwise the warranty is invalidated.
9. WARRANTY
The warranty is applied as per Italian Legislative Decree No. 24 of 02.02.2002 and later amendments.
The warranty covers the operation of the product and the materials comprising it, excluding indirect damage. The warranty does not cover any costs
incurred to reach the location of the product under warranty and any fitting or removal costs.
For duration and validity of the warranty (24/12 months according to whether the sale was to a private individual or company/professional) please refer
to the fiscal sales receipt and the label on the product.
In any case, to take advantage of the warranty the purchaser must report the fault in writing to the seller within two months of its occurrence, otherwise
the warranty will be null and void.

9.1 Manufacturer's Warranty

Notwithstanding the terms of law, for products manufactured from 01/01/2016 Bettio Service spa provides a manufacturer's warranty as per art. 133 of
Italian Legislative Decree 206/2005 exclusively on the plastic and mechanical parts of the products.
The conditions of this warranty are given below. They do not affect statutory rights:
a) Validity of this manufacturer's warranty is ten years from the production date indicated on the product ID label.
b) This manufacturer's warranty refers solely to the repair and/or replacement (labour included and without costs) of the plastic and mechanical parts of
PICOSCENICA
Sicurezza - Normative
Safety - CE rules
Sicherheit und Vorschriften
Sècuritè et normes
Seguridad y normas