Table des Matières
Publicité
The state of the structure on which the flyscreen will be fixed must be checked on the basis of the dynamic stress that the frame must
withstand with the flyscreen fully unwound from the cassette, and that is a wind speed of 130 km/h. With hollow bricks use suitably sized
expansion plugs with chemical adhesive.
If the resistance requirements necessary for safe fixing are not satisfied, increase the number of wall plugs and screws. The screws and wall plugs
also depend on the state and the nature of the structure, masonry/metal/wood window/door frame, onto which the installation/fixing is to be carried
out. Wall plugs and screws are not supplied with the product. Take care when handling the product: the winder mechanisms are mounted with loaded
springs. The instructions for installation are described on the sheet contained in the pack. Any sealing must be done with neutral silicone resin. The
flyscreen must be closed when the wind speed reaches 20 km/h.
8. MAINTENANCE
8.1 Routine maintenance
Given the high quality of the materials used in making the flyscreen, no routine maintenance is envisaged other than cleaning the mesh to protect it
against the formation of mould/mildew caused by dust or other material being deposited on them. The mesh must be visually inspected at least twice
a year; a mesh screen should be checked in spring before being used for the summer and in autumn before packing it up for the winter.
The mesh may be cleaned with a vacuum cleaner; the mesh may also be cleaned with a sponge or cloth dampened with lukewarm water. Let the
mesh dry thoroughly after cleaning before winding it up. Do NOT use solvents, ammonia or hydrocarbons for cleaning.
CAUTION: cleaning carried out using steps, platforms or such must only be done by specialised personnel working in conformity with
safety regulations and who must use suitable personal protective equipment such as body harnesses with separate safety line (see Italian
Legislative Decree 81/2008).
8.2 Extraordinary maintenance
CAUTION: only professionally qualified and trained personnel may carry out extraordinary maintenance: it is therefore necessary to
request the service of a specialist. If the flyscreen or any part of it needs to be dismantled, see the installation instructions. If the mesh is torn,
however small the tear, it must be replaced.
Only use original spare parts otherwise the warranty is invalidated.
9. WARRANTY
The warranty is applicable in relation to the contents of Italian Legislative Decree No. 24 of 02.02.2002. The Warranty is for 24 months (or more when
explicitly indicated) and covers natural persons who purchase the product for purposes that may be considered unrelated to their professional activity
(private end customer). The warranty is for 12 months if the product is invoiced to a Company or Professional office subject to VAT.
The warranty covers any part or parts which are shown to be defective due to faulty material or workmanship. The company will not be responsible
for any incidental or consequential damage or injury. The warranty does not cover any costs incurred to reach the place where the product is installed
nor any costs for installation or removal. As is accepted practice, the original invoice or receipt is evidence of the date of purchase and therefore of
the validity and duration of the warranty.
9.1 Rules for the Warranty to be valid
-Comply with the allowed use of the product.
-Comply with the instructions for use and maintenance.
-The warranty will only be valid if accompanied by the invoice or receipt giving evidence of the date of purchase.
-Only a specialised installer must carry out installation and compulsory maintenance, proof of which must be shown by means
of the taxation document with regard to this warranty.
Sicurezza e normative
Safety and CE rules
Règlementation CE
67
CE Vorschriften
Publicité
Table des Matières
