Bettio PICOSCENICA Manuel D'utilisation Et De Maintenance page 60

PICOSCENICA
the products. It excludes all aluminium parts, the mesh/fabric, all electric and electronic parts such as electric motors, automation and switches, the en-
tire Motoscenica® automation package and brushes. The purchaser shall cover the costs for dismantling, assembling and transporting to our premises
at Marcon, Italy.
c) If this is not possible, we will replace and/or repair as indicated above in order to ensure that the customer has a product in perfect working order. In
addition, at our discretion we will provide a new product with similar characteristics to the previous one, within the limits of clause b) above.
d) Operations under manufacturer's warranty do not cause an extension of the duration of the statutory warranty.
9.2 Warranty Void
- Improper use of the product with wind, rain, hail, snow and/or combinations of such. Black-out or filter blinds are exclusively for
indoor use.
- Structural failure of the part to which the product is anchored.
- Manhandling; fitting, dismantling and maintenance not carried out by specialists or not in observance of regulations and assembly instructions.
- Lack of obligatory maintenance within the established terms.
- Use of spare parts not original BETTIO SERVICE SPA.
- Removing or obscuring the BETTIO SERVICE SPA ID label, impeding product traceability.
For other specific items not covered by the warranty, see any notes indicated by the company.
In the case of controversy, the only competent court is the Court of Venice, Italy.
10. PACKAGING, HANDLING AND TRANSPORTATION
Given the size and shape of the product, when it is longer than 240 cm it must be handled by two persons.
The packaging contains the instructions for installation, use and maintenance as well as the warranty: the installer must ensure that they are
read over, explained and then given to the end user.
Keep the packaging materials out of reach of children, since they can be a source of danger.
11. LIST OF RISKS
11.1 Installation: take all the necessary precautions on site especially in respect of the risks of fall.
11.2 Risks related to use and routine maintenance.
Products with return spring:
- Danger of fall during cleaning of mesh: avoid leaning out of windows or only do so using suitable equipment.
11.3 Risks related to maintenance/repair:
a) danger of impact during spring loading/release operations
b) danger of incorrect refitting of the flyscreen after mesh replacement
c) danger due to failure to use equipment and to PPE that do not bear the EC mark
11.4 Danger of tripping over chain elements: place warning signs
11.5 Danger of tripping over guide for door with side opening: place warning signs
11.6 Risks related to disposal: the product must be disposed of in accordance with rules and regulations currently in force
11.7 The noise level is below 70 dB(A)
Sicurezza - Normative
Safety - CE rules
Sicherheit und Vorschriften
Sècuritè et normes
Seguridad y normas