Auping AirMassage Mode D'emploi page 39

D. Fixing the control box
Use the bracket to fix the control box
to the base (see fig. 9).
Please note! The control box should
be fitted with the infrared eye facing
the foot end of the bed.
In case of a double bed, ensure that
the control boxes are always placed
on the outside. Do not position cables
in front of the infrared eye, as this
hinders the control box receiver's
proper reception from the infrared
remote control transmitter.
7.4 Preparing for use
Ensure that all connections have been
made. Push the plug into the power
socket. Before initial use of the
AirMassage & Hotspot, check whether
the display is set to the correct time.
Setting the current
time
1. Press and release programming
key P.
2. Press confirmation key SET. The
time indication starts flashing in the
display.
fig. 9
3. Press the + and - keys to set the
hours. Press SET to confirm.
4. Then use the + and - keys to set the
minutes. Again press SET to
confirm.
GB15