Hotspot; Switching Off All Functions At Once; Switching Off All Programs At Once; Restore Factory Settings - Auping AirMassage Mode D'emploi

4.4 Hotspot

You can use the remote control to
activate the hotspot; directed warmth
that will rapidly penetrate deep into
the lower back muscles.
4.4.1 Activation and deactivation of
the Hotspot
1. Press the key for the Hotspot for a
short time. The symbol in the
display will start flashing.
2. By pressing the Hotspot key
several times. You can set the
desired heat level.
3. Press SET to confirm the set level
and to switch on the Hotspot.
You will hear a single sound signal
when the Hotspot switches on. The
hotspot will switch off automatically
after 15 min.
4.4.2 Switching off the Hotspot
before the automatic switch-off
time
Press the SET key for 2 seconds to
deactivate the Hotspot. A double tone
will sound when switched off.
4.5 Switching off all functions
simultaneously
Press the key for the external switch
for 7 seconds. All active functions are
now switched off.
4.6 Switching off all programs
simultaneously
It is recommended to switch off all
programs when you are going on
holiday or not using your bed for an
extended period.
Press the – and + keys simultaneously
for 2 seconds. All programs are now
switched off.
Again press the – and + keys for
2 seconds to reactivate all programs.

4.7 Restore factory settings

Press the SET key for 10 seconds. A
double tone will sound. All personal
settings will be removed and the
factory settings will have been
restored.
GB9