Airmassage - Auping AirMassage Mode D'emploi

4.3 AirMassage

The AirMassage, a subtle massage for
total relaxation of the whole body, can
be activated by means of the remote
control.
4.3.1 Activation and deactivation
of the AirMassage
Briefly press the AirMassage key to
switch it on.
To switch off, keep the AirMassage
key pressed in for 2 seconds. The
AirMassage will
automatically after one hour. If you
want to enjoy some more AirMassage,
you will need to switch it on again.
4.3.2 Automaticly activating
and deactivating
the AirMassage
You can also program the AirMassage
starting and stopping times. You can,
for example, use the AirMassage to
wake you up in the morning.
1. Press and release the programming
key P.
2. Press the key for the AirMassage.
The symbol starts flashing in the
display. Depending
previous settings, the display
switch off
on your
shows 'on', 'off' or 'on AUTO'. Use
the + and -- keys to change the
setting.
on MAS =program runs a single
cycle
on AUTO = program starts and
stops every day at the
set times
off MAS = program off
3. Select 'on' to start the program for
single cycle.
4. Press confirmation key SET once to
change the start time. 'on' appears
in the display.
5. Press the + and -- keys to set the
start time. First set the hours for
the start time.
Press SET to confirm.
6. Then use the + and -- keys to set
the minutes. Again press SET to
confirm. The display shows 'off'.
7. Press the + and -- keys to set the
end time. First set the hours for the
end time.
Press SET to confirm.
GB7