Installation Guide; Description; Safety; Fitting The Parts - Auping AirMassage Mode D'emploi

7. Installation guide

Introduction
Before you start using your Auping
Royal bed or if you have dismantled it
to clean or move it, you have to fit and
install the AirMassage & Hotspot again
in full or in part.
In this chapter you can read how to set
up the complete system.
Use the installation card and/or
template included.

7.1 Description

Euro, UK or USA plug
fig. 4
A. Transformer
B. Control box
C. Connectors
D. Remote control

7.2 Safety

The AirMassage & Hotspot conform to
current CE directives.
A schematic connection diagram can
be found on the underside of the
control box.
Use the AirMassage & Hotspot only in
combination with an Auping Royal
mesh base.
Check that the connecting voltage of
the transformer corresponds with that
of the mains voltage in your home.

7.3 Fitting the parts

You need to remove the mattress
cover only if you want to wash or dry-
clean it. The mattress has a removable
comfort layer that contains the Hotspot
and AirMassage. This layer can only be
removed by a qualified craftsperson.
GB13