Before Using For The First Time - WMF Kuchenminis Mode D'emploi

Symbol/button Function
On/off button
Start button
Select lower cooking area
Select upper cooking area
Remaining time
Leafy and fruit vegetables program
Root vegetables
Rice/pasta program
Individually adjustable program
,
Keep warm function
Insufficient water
Note: The symbols in the body text are shown in inverted colour due to typographical reasons.
16

Before using for the first time

Cleaning
Clean the device before use as described in the chapter on "Cleaning and Care".
Starting up the appliance
1. Fill the water tank with cold tap water. Fill the tank at least half full with
water, but no higher than the max marker.
We recommend always filling to the maxmarker.
The markers are located on the back panel of the water tank.
Note: You must insert the steam locks into the handles on the base of the
appliance to prevent the handles from becoming too hot.
Remove this from the water tank at the end, so that the remaining water can
be emptied using the handles.
2. Place the lower collection tray with the steam pipe and the lower cooking
area on top of the water tank. You can now place the upper collection tray,
upper cooking area and lip on top.
Note: the guided staking system is designed so the individual components can
be correctly placed on each other. All the steam outlets for the cooking areas
are located on the back of the device.
There should be no gaps between the individual bowls, cooking areas. Check
that the components have been put together in the correct order.
3. If using just one cooking area, only use the lower collection tray, the lower
cooking area without steam pipe, and the lid.
Select only one program for the lower cooking area .