WMF Kuchenminis Mode D'emploi page 17

4. Put the ingredients in the cooking area.
Make sure you put the ingredients with similar cooking times in the same
cooking area.
Note: if you are using two different ingredients in one cooking area, you can
separate the area with the divider. You can divide the cooking area in half, or
2/3 and 1/3.
Note: use the Cromargan® cooking bowl to prepare rice, noodles or
marinated/seasoned foods.
5. Plug the device into the mains. You will hear an acoustic signal.
6. Select the appropriate program/cooking time for the upper (
cooking area ( ).
After pressing the button
program with the preset cooking time on the control panel.
7. Select the programs (
Confirm the program you want by pressing the selection button.
8. The preset cooking time (for the specific program) will flash. Manually change
this by rotating the selection button and confirming by pressing the selection
button.
Note: the device has two individually programmable programs (
Use can use them to set your preferred cooking time yourself. The last setting
used is saved.
9. Begin cooking by pressing the start button .
Note: the device has a keep warm function to keep food warm after cooking
is completed. After pressing the start button ,
Press the start button
The symbol will show. If not, the device will automatically switch off after
cooking is complete.
10. You can see the remaining cooking time on the display (countdown function).
The area with the shorter cooking time only switches on when the area with
the longer cooking time reaches that of the shorter one.
Please note: if there is not enough water in the water tank, you will hear an
acoustic signal during the cooking process and
Confirm the signal by pressing the start button . Fill the tank at least half
full with water. You can fill in fresh water with a beaker using the handles of
the lower collection tray. Continue the cooking process by pressing the start
button .
11. The device will automatically switch off after cooking is complete/the keep
warm function is activated. You will hear an acoustic signal.
Note: you can interrupt the cooking process at any time by pressing the on/
off button . The device will switch off.
Danger: risk of scalding! Hot steam is released when you remove the lid, the
steaming inserts and collection trays. You should therefore always use pan
holders.
or you will see the currently selected
, , , or ) by rotating the selection button.
within 3 seconds to activate the keep warm function.
) or lower
and
will appear in the display.
will flash in the display.
will appear on the display.
).
17