Transport And Storage; Installation; Removal Of The Upper Shell And Installation Of The Top Part; Installation Of The Circulation Set - oventrop Regumaq X-25 Notice D'utilisation

Transport and storage

4. Transport and storage
Temperature
0 °C to +40 °C
range
Relative air Max. 95%
humidity
Particles Store dry and free from dust
Mechanical Protected from mechanical agitation
influences
Weather Do not store outdoors
influences
Protect from direct sunlight
Chemical
Do not store together with aggres-
sive fluids
influences
5.

Installation

The installation of the fresh water station Regu-
maq X-25 is explained in this chapter. Installa-
tion of the Regumaq X-45 is identical.
5.1 Removal of the upper shell and
installation of the top part
1 2
Illust. 3: Removal of the upper shell
(1) Upper shell
(2)
Housing tongue
1. Remove the upper shell (1) from the station.
2. Remove the housing tongue (2) by breaking it off
towards the rear along the rated break point.
20
Circulation set Regumaq X-25/X-45
Illust. 4: Upper shell including top part of the circula-
tion set
(3) Top part of the circulation set
3. Insert the top part of the circulation set (3) into the
opening in the upper shell.
4. Put the upper shell with the top part to one side.
5.2

Installation of the circulation set

Also consult the operating instruc-
tions of your fresh water station!
Illust. 5: Connection for the circulation set
(1) Connection for the circulation set
5.2.1

Tools required

• 37 mm spanner
3
1
138115080-V05.04.2020