Sony MEX-1GP Mode D'emploi page 7

G OPEN button 5
H GP*
1 /ALBM* 2 +/– buttons*
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
I SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
J USB jack (Mini-B) 8
To connect to your computer.
K SENS/BTM button 9
To improve weak reception: LOCAL/MONO
(press); start the BTM function (press and
hold).
L SOURCE button
To power on; change the source (GPL
(GIGA PANEL)/Radio/CD/MD*
M MODE button 9, 13
To select the radio band (FM/MW/LW)/
select the unit* 5 .
N AF (Alternative Frequencies)/TA
(Traffic Announcement) button 10
To set AF and TA/TP in RDS.
O Number buttons
CD/MD* 4 :
(3): REP 8
(4): SHUF 8
(5): BBE MP* 3
6
To activate the BBE MP function, set
"BBEMP-ON." To cancel, set
"BBEMP-OFF."
(6): PAUSE*
7
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
P EQ3 (equalizer) button 12
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
Q DSPL (display) button 8
To change display items.
R RESET button 4
S Z (eject) button 5
3
T Disc slot 5
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
wa < (.)/, (>) buttons
ws VOL (volume) +/– button
wd ATT (attenuate) button
wf SEL (select) button
wg M (+)/m (–) buttons
4 /AUX).
wh SCRL (scroll) button 8
wj Number buttons
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
*3 If the changer is connected, the operation is
different, see page 13.
*4 When an MD changer is connected.
*5 When a CD/MD changer is connected.
*6 Only when playing a CD on this unit.
*7 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 17.
To eject the disc.
To insert the disc.
To control CD/radio, the same as (SEEK)
–/+ on the unit.
To adjust volume.
To attenuate the sound. To cancel, press
again.
The same as the select button on the unit.
To control CD, the same as (GP/ALBM) +/–
on the unit.
To scroll the display item.
To receive stored stations (press); store
stations (press and hold).
7