Hot Components; Transport And Storage; Scope Of Delivery; Accessories - Wilo Stratos MAXO Notice De Montage Et De Mise En Service

en-US

Hot components

WARNING
Hot components!
Pump housing, motor housing and lower module
housing can become hot and cause burns on contact.
▪ Only touch the user interface during operation.
▪ Allow the pump to cool down before any work.
▪ Keep easily flammable materials out of reach.
7

Transport and storage

7.1

Scope of delivery

➜ Fig. 1 and 2
NOTICE
Fit the sensor cable supplied in the accessories kit on
site before electrical connection and initial commis-
sioning (applicable to Stratos MAXO / Stratos MAXO-
Z).
7.2

Accessories

▪ CIF modules
▪ PT1000 (contact and immersion sensor)
▪ Companion flanges
Accessory parts must be ordered separately. Please refer to the cat-
alogue for a detailed list.
12
7.3

Transport inspection

Check delivery immediately for damage and completeness. Make a
complaint immediately if necessary.
7.4

Transport and storage conditions

WARNING
Risk of injury due to soaked packaging!
The product may fall out of packaging that has be-
come weakened because it has been exposed to too
much moisture, causing injury to personnel.
WARNING
Risk of injury due to torn plastic bands!
Plastic bands on the packaging that are torn do not
protect the contents during transport. Products that
fall out may cause injury to personnel.
▪ Only carry using motor or pump housing ➜ Fig. 6.
▪ Store in original packaging.
▪ Storage of pump on level surface.
▪ Protect against moisture and mechanical loads.
▪ Permissible temperature range: -4 °F to +158 °F (-20 °C to + 70 °C)
8

Installation

8.1

Personnel requirements

Installation may only be carried out by qualified technicians.
WILO SE 2019-08