Information On Instructions; About These Instructions; Original Operating Instructions; Identification Of Safety Instructions - Wilo Stratos MAXO Notice De Montage Et De Mise En Service

en-US
1

Information on instructions

1.1

About these instructions

These instructions enable safe installation and initial commissioning
of the pump.
▪ Read these instructions before all activities and keep them accessi-
ble at all times.
▪ Please note the information and identification on the pump.
▪ Observe applicable regulations at the pump's installation location.
▪ Please refer to the detailed instructions online.
See QR code or www.qr.wilo.com/stratos-maxo_om
2

Original operating instructions

The German language version represents the original operating in-
structions. All other language versions are translations of the origi-
nal operating instructions.
3

Identification of safety instructions

In these 'Installation and operating instructions', safety instructions
are used for material damage and personal injury, and are repre-
sented in different ways:
▪ Safety instructions for personal injury start with a signal word and
have a corresponding prefixed symbol.
▪ Safety instructions for material damage start with a signal word and
are represented without a symbol.
Signal words
▪ Danger!
Non-compliance will cause death or serious injury!
6
▪ Warning!
Non-compliance can cause (serious) injury!
▪ Caution!
Non-compliance can cause material damage or even total loss.
▪ Notice!
Useful information on handling the product
Symbols
The following symbols are used in these instructions:
General warning symbol
Danger of electrical voltage
Warning of hot surfaces
Warning of magnetic fields
Notes
4

Personnel qualifications

Personnel must:
▪ Be informed of the locally applicable accident prevention regula-
tions.
▪ Have read and understood the installation and operating instruc-
tions.
The personnel must have the following qualifications:
WILO SE 2019-08