Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.3
Product-dependent symbols
1.3.1
Symbols on the product
The following symbols are used on the product:
Warning: hazardous electrical voltage
Warning: hot surface
Revolutions per minute
Rated speed under no load
Wear eye protection
Wear a hard hat
Wear ear protection
Wear protective gloves
Wear safety shoes.
Lock symbol
Service indicator
Drilling performance indicator
Wireless data transfer
1.4
Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Type:
Generation:
Serial no.:
1.5
Declaration of conformity
We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration issued by the certification department can be found at the end of
this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
2
English
DD 30-W
01
2048398
*2048398*
Publicité
Table des Matières
