SOLIS 8371 Mode D'emploi page 55

2 . MO UN T ING TH E AT TACHME NT
Make sure that the power plug is not plugged into the socket.
●
Select the suitable attachment, depending on the required function: Multi blade,
●
whisk, whipping disk or meat and vegetable blade.
Carefully push the attachment onto the drive shaft in the foot of the blender
●
shaft so that the cams on both sides of the shaft slide into the notches on the
attachment until you hear a faint "Click".
Once the attachment has locked into place, it is firmly connected to the shaft
●
GB
and you can start blending.
Caution: The blades are extremely sharp! If possible, do not touch the blades to
avoid cutting yourself! Only touch the blades on the shaft or the flat parts!
108
push
"Click"
3 . MOU NTI NG THE B LEN DER SHAFT TO THE M O TO R UNI T
You have already locked the chosen attachment onto the shaft in the foot of
●
the blender shaft.
Now, push the blender shaft into the motor unit. To do that, you have to
●
slide the cover for the blender shaft fixation (I) up to make it accessible.
By doing that, you have closed the openings for the stirring tools, prevent-
ing splashes from getting into the two openings while the appliance is used
as a blender.
Push the blender shaft into the fixation and turn it in a clockwise direction until
●
it locks into place, firmly connecting the shaft and the motor unit.
GB
109