Before First Use - SOLIS 8371 Mode D'emploi

BEFORE FIRST USE

s
Lift the motor unit off the storage base. Lift the storage base off the storage
●
box. The storage layer with the compartments for the attachments and the key is
located underneath. If you lift it by its nose, you can find the transparent storage
box for the stirring tools (egg whisks and dough hooks), the blender shaft and
the power cord underneath.
Before using your mixer for the first time, remove all potential advertisement
●
stickers and labels (apart from the type plate).
GB
Rinse all parts of the mixer apart from the motor unit with warm water and
●
some dishwashing liquid. Make sure not to cut yourself on the sharp blender
shaft attachments. For the attachments, best use a dishwashing brush. Dry all
parts carefully.
Place the accessories back in the corresponding positions in the different levels
●
and put the three-part storage box back together.
Wipe the motor unit clean with a soft, slightly moist towel. The motor unit must
●
not be held under running water or submerged in water resp. come into contact
with another liquid.
Storage base for motor unit
100
Storage box for the attachments
and the blender shaft key
Storage box for the egg whisks, dough hooks
and the blender shaft
When all parts are completely dry, put the mixer back together as described in
●
the sections "Use as a handheld mixer" (see page 102) or "Use as a blender"
(see page 107).
Note: The blade attachments for the blender are extremely sharp. Avoid any con-
tact to your fingers resp. your hand!
GB
101