Menu Installation - BWT bestaqua 14 Notice De Montage Et D'utilisation

3.8 Menu: INSTALLATION
The main selection menu appears with "Start"
being activated.
START
St a r t
START
I n s t a l l a t i o n
Fig. 25: Main selection menu: "Start", "Installation"
The menu item " WCF MIN" is active.
The following operational parameters may be set in the
"INSTALLATION" selection menu (Fig. 30):
Minimum value for permeate yield
WCF MIN
WCF MAX Maximum value for permeate yield
PRESSURE STOP MAX
Deactivation pressure RO
PRESSURE START MAX
Activation pressure RO
STOP TIME DELAY
Stop delay time (HP-pump)
MAX PUMP PRESSURE
Maximum pump pressure
RINSE TIME
Step time: Rinsing
WATER FILL UP TIME Step time: For feed water filling
Fig. 26: Menu Level 1: "INSTALLATION"
You effect settings in the "INSTALLATION" menu
according to the following overview menu structure of
Fig. 27, Fig. 28, Fig. 29.
Note: The settings in the "INSTALLATION" menu
may only be effected by qualified and instructed
persons.
Please observe: The setup menu is not password-
protected. Please enter the newly set parameters
in the form of Part 7.1.
The adjustment of "WCF MIN" and "WCF MIN"
is effected according to BWT specifications in
accordance with the available water quality.
2x
WCF MIN
WCF MAX
PRESSURE STOP MAX
PRESSURE START MAX
STOP TIME DELAY
MAX PUMP PRESSURE
RINSE TIME
WATER FILL UP TIME
Minimum WCF
Minimum WCF
Minimum WCF
Minimum WCF
Minimum WCF
Fig. 27: Programming procedure: INSTALLATION 1/3
START
WCF MIN
WCF MAX
PRESSURE STOP MAX
PRESSURE START MAX
STOP TIME DELAY
MAX PUMP PRESSURE
RINSE TIME
WATER FILL UP TIME
30 %
40 %
40 %
45 %
45 %
EN
Fig. 28
60 %
Maximum WCF
70 %
Maximum WCF
70 %
Maximum WCF
75 %
Maximum WCF
75 %
Maximum WCF
49