Manual Operation; Frost Protection - Dimplex H 260E Instructions De Montage Et D'utilisation

English
9.4

Manual operation

NOTE NOTE
The timer week program is deactivated in manual
operation.
The room temperature specification takes place manu-
ally.
Press the MENU key. The TIMER symbol flashes.
Press or to select the MANUAL symbol. The
MANUAL symbol flashes. Press the ENTER key.
Use or to set the room temperature.
9.5

Frost protection

Specified frost protection temperature of 7° C.
Press the MENU key. The TIMER symbol flashes.
Press or to select the FROST symbol. The
FROST symbol flashes. Press the ENTER key.
FROST symbol and temperature 7° C are dis-
played.
NOTE NOTE
The pre-set temperature value of 7° C can be changed
with or .
EN-5
9.6 Run-back timer
The run-back timer can be used to activate a one-off,
time-limited heating program.
Basic settings
Hold down the MENU and ADVANCE keys until the
rb display flashes.
Press the ENTER key. ON/OFF display flashes.
Press or
ENTER key. Maximal run-back time flashes.
Use or
Maximal run-
back time
30 minutes
01:00 h
(factory)
01:30 h
02:00 h
04:00 h
06:00 h
08:00 h
Press the ENTER key. Room temperature flashes.
Where necessary, change the room temperature
with or . Confirm with the ENTER key.
1810/C
H 260E, H 260E eco
to select the ON display. Press the
to set the maximal run-back time.
Press the ADVANCE key:
2 3
1 time
times times
00:15 00:20 00:25
00:15 00:30 00:45
00:15 00:30 01:00
00:30 01:00 01:30
01:00 02:00 03:00
01:30 03:00 04:30
02:00 04:00 06:00
www.dimplex.de/en
4
times
00:30
01:00
01:30
02:00
04:00
06:00
08:00