Dimplex H 260E Instructions De Montage Et D'utilisation page 15

H 260E, H 260E eco
Run-back timer On
NOTE NOTE
Not possible if operating mode TIMER is selected.
Press the ADVANCE key. Run-back time flashes.
The run-back time can be changed by pressing the
ADVANCE key several times.
Press the ENTER key. Run-back timer = ON.
Run-back timer Off
Press the ADVANCE key several times until the
OFF display flashes.
Press the ENTER key. Run-back timer = OFF.
9.7 Adaptive start-up
NOTE NOTE
This function is executed only when the operating
mode TIMER is selected.
This function guarantees that the set room temperature
is achieved exactly at the start of the switch-on time.
Example:
In the timer menu, a set room temperature of 22° C is
specified for 07:00. The current room temperature is
17° C. The heating device switches on early so that the
specified room temperature of 22° C is reached by
07:00.
www.dimplex.de/en
Hold down the MENU and ADVANCE keys until the
rb display flashes.
Press or
symbol. The symbol flashes.
Press the ENTER key.
Press or
function on or off.
10. Options
10.1 Blocking keys
Key functions are blocked using a freely selectable
four-digit numerical code.
NOTE NOTE
The function of the run-back timer and switching to the
next programme item in timer mode is also possible
with active key lock.
1810/C
to select the ADAPTIVE START
to select ON or OFF to switch the
English
EN-6