Stop Function; Recall Function - GUTMANN FONDA Mode D'emploi Et Instructions De Montage

Masquer les pouces Voir aussi pour FONDA:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
Operation

4.14 Stop function

The cooking process can be briefl y interrupted with the
STOP function, e.g. if the doorbell rings. The STOP func-
tion must be released in order to continue cooking at the
same power level. If a timer has been set it will pause and
will then continue.
This function is only available for 10 minutes for reasons of
safety. The hob will then be switched off .
1. Pots and pans are on the cooking zones and the requi-
red power levels have been set.
2. Press the Stop key . Instead of the selected power
settings, the interval sign
3. The interruption is ended by fi rstly pressing the STOP
key and then the fl ashing sensor fi eld
the STOP key .
When operating the sensor fi eld slide over the comple-
te sensor fi eld.
The second key must be pressed within 10 seconds,
otherwise the stop function will be maintained.

4.15 Recall function

(recovery function)
The most recent setting can be recovered if the hob is
switched off unintentionally.
The recall function only works if at least one cooking zone
is switched on.
1. The hob is inadvertently turned off by the ON/OFF key
.
2. Within 6 seconds after turning it off , press the ON/OFF
key
again. The stop key LED will blink. The STOP
key
must be pressed immediately afterwards.
The original cooking levels are restored. The cooking
process continues.
What can be restored:
Cooking levels of all cooking zones
Minutes and seconds of programmed timer functions
Automatic boost function
Power boost
Not to be restored:
Operation time limit (it is counted from 0)
GB
will light up.
left of
29

Publicité

Table des Matières
loading

Table des Matières