Suitable for induction cooking
28
Operation
4.10 Operating the keys
The controls described here expect the pressing of a (selecti-
on) key to be followed by the pressing of a subsequent key.
The next key will need to be pressed within 10 seconds,
otherwise the selection will be deleted.
4.11 Switching on the hob and cooking zones
1. Press the ON/OFF key
setting 0 appears and a short signal will sound. The cont-
rols are ready for operation.
2. The sensor fi eld
activated immediately afterwards. A power setting will be
switched on.
........ left ..............Power setting 0.
........ center .........Power setting 6.
........ right ............Power setting P*
See the section on Worth knowing about the slider (sensor
fi eld)
Press the respective sensor fi eld
power setting or to switch on an additional cooking zone.
3. Immediately put cookware suitable for induction cooking
onto the cooking zone. The pan recognition device will ac-
tivate the induction coil. The pot or pan will be heated up.
As long as no cooking pot is placed onto the cooking zone,
the display will alternate between the power level set and
the symbol
. If no pot is placed on the cooking zone it
will switch off after 10 minutes for reasons of safety.
Please refer to the Section on pan recognition.
4.12 Switching off a cooking zone
4. a) Press the touch control
b) drag your fi nger to the left across the touch control
to reduce the power setting to 0
c) press the ON/OFF key
switched off .
4.13 Switching off the hob
5. Press the ON/Off key
irrespective of any settings.
Please note:
The hob will switch off automatically after 10 seconds when all
the cooking zones are switched of manually (power setting 0)
and no key/sensor fi eld is pressed afterwards.
* The Power boost function is activated immediately.
See the section on Power setting.
(approx. 1 sec.) until the power
of a cooking zone must be
to change a
on the far left or
. All the cooking zones are
. The hob will be switched off ,
GB