Important - MIRKA DEOS 353X CV Instructions D'utilisation

81 mm x 133 mm (3 in. x 5 in.) 10,000 opm Orbital Sanders (see "Product Configuration/Specifications" table for particular model)
to which this declaration relates is in conformity with the following standard(s) or other normative document(s) EN ISO 15744:2008.
Following the provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives and consolidating Directive
Jeppo 25.03.2015
Place and date of issue
Operator Instructions
Includes – Please Read and Comply, Proper Use of Tool,
Work Stations, Putting the Tool Into Service, Operating In-
structions, Product Configuration/Specifications Tables, Parts
Page, Parts List, Sander Spare Parts Kits.
Manufacturer/Supplier
KWH Mirka Ltd.
66850 Jeppo, Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
Recommended Airline
Size - Minimum
10 mm 3/8 in.
Declaration of conformity
KWH Mirka Ltd.
66850 Jeppo, Finland
declare on our sole responsibility that the products
2006/42/EC
Company

Important

Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
Required Personal Safety Equipment
Recommended Maximum
Hose Length
8 metres 25 feet
28
Mirka 10,000 opm
81 mm x 133 mm )3 in. x 5 in.(
ORBITAL SANDERS
Stefan Sjöberg, CEO
Safety Glasses Breathing Masks
Safety Gloves Ear Protection
Maximum Working Pressure
Recommended Minimum
Air Pressure
6.2 bar 90 psig
NA NA
Original Instructions