Preferences; Angle Mark; Default; Downmix - Telefunken TF16D857UV Mode D'emploi

PREFERENCES

ANGLE MARK

This option allows you to turn on /off the angle
mark on the screen, which is displayed to
indicate that a multi angle scene has started.
It also shows which angle you are currently
watching.

DEFAULT

If you choose RESET and press SELECT, the
factory-presets are loaded. Parental level and
parental password does not change.

DOWNMIX

This mode can be selected when the digital
audio output of the TV is used.
SURROUND: Surround sound output.
STEREO: Two channels stereo.
PARENTAL (Parental Level)
Playing some DVDs can be limited depending
on the age of users. The "Parental Control"
function allows playback limitation level to be
set by the parent.
Parental Level can be adjusted to one of the
eight levels. Level "8 ADULT" adjustment let
you watch all of the DVD titles ignoring the DVD
disc's parental level. You can watch the DVD
discs, which has the same or lower parental
level than the player's level only.

PASSWORD (Change Password):

Using this item you can change the current
password.
01_[GB]_MB25_ (02-DVD)_16857W_1900UK_IDTV_NICKEL5_DIVX_10061867_50144013.indd 15 01_[GB]_MB25_ (02-DVD)_16857W_1900UK_IDTV_NICKEL5_DIVX_10061867_50144013.indd 15
To change the password you will be prompted to
enter your old password. After you have entered
your old password, you can now enter the new
4-digit password.
You can use C key to delete the incorrect
entry.
Note: Factory preset of the password is "0000". You
have to enter XXXX digital password every time you
want to change the parental level. If you forget your
password please contact technical service.

Troubleshooting

The picture quality is poor (DVD)

• Make sure the DVD disc surface is not
damaged. (Scratch, fi ngerprint etc.)
• Clean the DVD disc and try again.
See instructions described in "Notes on Discs" to clean
your disc properly.
• Ensure that the DVD disc is in the drawer with
the label uppermost.
• A damp DVD disc or condensation may effect
the equipment. Wait for 1 to 2 hours in Stand-
by to dry the equipment.

Disc does not play

• No disc in the machine.
Place a disc into the loader.
• Disc incorrectly loaded.
Ensure that the DVD disc is in the drawer with the
label uppermost.
• Wrong type of disc. The machine cannot play
CD-ROMS etc.
• The region code of the DVD must match the
player.

Wrong OSD language

• Select the language in the set-up menu.
• The language for the sound or subtitles on a
DVD cannot be changed.
• Multilingual sound and/or subtitles not recorded
on the DVD.
• Try to change the sound or subtitles using
DVD's title menu. Some DVD's do not allow
the user to change these settings without using
the disc's menu
English - 59 -
27.02.2009 13:32:35 27.02.2009 13:32:35