Playing Media From A Sd/Sdhc Card - Ecler ePLAYER1 Notice D'utilisation

CONTROL & SELECT (2) digital encoder allows the access to additional information of the current track
and playlist. Press once to display track's information: name, audio format (mp3, wav, etc.), bit rate
(kbps), time (mm:ss) a sample frequency (kHz).
A r t i s t - s o n g
3 2 0
Press CONTROL & SELECT (2) digital encoder twice to access to the playlist's information:
track's position in the playlist and number of items in queue.

5.2.2. Playing media from a SD/SDHC card

Insert an SD/SDHC card with compatible audio contents inside the SD card slot (11). Then,
press ENTER/MENU (6) key to access main menu. In sub-menu SOURCE, rotate CONTROL &
SELECT (2) digital encoder to select MMC source and press it to confirm (SELECT).
Parameter will blink until selection is confirmed. Press  (9) to start playing.
If the system cannot find/read the device, the display will show the message: MMC
UNAVAILABLE (blinking). If this happens please, check that the device has been inserted properly or
check technical specifications. If audio files are not supported, the display will show the message: NOT
FOUND. If this happens please, check supported audio formats.
A r t i s t - s o n g . m p 3
 0 2 : 5 6
0 3 : 0 5
Track's information
I N D E X
0 0 1 7
Playlist information
ePLAYER1 playing a song from the SD card
m p 3
4 4 . 1
|
T O T A L
|
0 0 6 4
M M C
9