Events; Store & Forward - Ecler ePLAYER1 Notice D'utilisation

6.3. Events

ePLAYER1 features 3 events: 2 of them triggered by GPI ports and the third one triggered by
silence detection. In this page both types of events can be configured:
•
GPI1/GPI2:
Source: Polarity, Direct or reverse; to define the trigger when opening or closing a contact, for
o
instance.
Target: select the action that ePLAYER1 will perform when the GPI is triggered.
o
•
SILENCE: silence detection event
Source: detection time. Select the permited silence time (no signal) before the event is activated.
o
Target: select the action that ePLAYER1 will perform when the silence time is consumed.
o
6.4. Store and Forward
Store & Forward module lets ePLAYER1 download remote media content to local storage
devices (USB/MMC). When active, it checks daily a remote location including audio media, compares
that one with the one already stored in its local media (SD card) and, if necessary (differences are
detected), synchronises the local one to be an exact copy of the remote one. That is a safe method to
play back contents with ePLAYER1 during its working hours (day time), stored in a local device, and
without taking the risk of real-time streaming reception issues. For safety and efficiency reasons, the
remote server where contents are stored must be an SSH one, and public and private keys must be
enabled and used.
Events page
Store & Forward module
17