Startup; Main Menu - Ecler ePLAYER1 Notice D'utilisation

5. STARTUP

ePLAYER1 has been designed in a way that it can be used as a local media player, with no need
of additional software. However, Ecler recommends to setup ePLAYER1 through its web application to
enjoy all its functionalities. Please, consult chapter 6 to know all these features.
Connect the power supply in the rear panel to turn on the device. The LCD display will show a
message during the unit's boot up process.
Please, check the device's firmware and software application versions. They should be updated to the
last version to guarantee that all features in this manual are available. Visit www.ecler.com to download

5.1. Main Menu

ePLAYER1's main menu allows playback adjustments, such as source selection, recalling
presets, etc.
Press ENTER/MENU (6) key to access the main menu. Navigation through the different items of
the menu is made by means of the keys NEXT/FF () (10) and PREV/RW () (7), moving to next or
previous item respectively. Once the item to adjust is selected, the rotary CONTROL & SELECT (2)
encoder allows the adjustment of the different parameters by its rotation. Last selection will begin to
blink until it is confirmed by pressing the CONTROL & SELECT (2) encoder. If a different item is
changed (NEXT/FF () and PREV/RW () keys), or the menu is left by pressing ESC (5) without
confirmation, changes will not apply, except for volume changes, which are made in real time.
Press ESC (5) key o leave the menu.
The following items can be found in the main menu:
•
SOURCE: audio source. It allows these sound sources selection: the USB device (USB), the SD/SDHC
card (MMC), DLNA device (DLNA), AirPlay device (AIRP) or one or more playlists, configured by the
user (see chapter 6 for further information). If the selected device cannot be found, cannot be read, o
the connection is not available (DLNA/AirPlay), the LCD display will show the message: UNAVAILABLE.
•
PRESET: preset recall (configuration memories). It allows the selection of one among 20 user presets.
Consult chapter 6 for more information.
•
VOLUME: volume control. It allows real time adjustment of the player's volume. 0dB is the maximum
value. Press the CONTROL & SELECT (2) encoder to MUTE the player. Press again to deactivate
MUTE.
•
REPEAT: repeat mode of the tracks inside the play queue.
PLAY ALL: plays just once the play queue.
o
PLAY ONE: plays just once the current track.
o
REPEAT ALL: starts again the same play queue when it ends.
o
REPEAT ONE: starts again the same track when it ends.
o
•
PLAY MODE: playback mode.
o SEQUENTIAL: sequential playback (same alphanumeric order as the one in the
storage device).
o RANDOM: random playback.
them.
7