Gpi Remote Control Ports; Front Panel - Ecler ePLAYER1 Notice D'utilisation

3.6. GPI remote control ports

The rear panel of ePLAYER1 offers 2 GPI control inputs (18). Each of these inputs can be
connected to an external physical device (e. g. a contact closure) and assigned to an ePLAYER1
function, as for example:
•
Activation/deactivation of the MUTE function by means of a switch or contact closure
•
Recalling a preset with a push button or contact closure
•
Etc.
GPI connectors are screw terminal blocks with three-contacts. The wiring is as follows:
GPI terminal
Ground
Connecting cables can be up to 500 meters with a minimum section of 0.5 mm

4. FRONT PANEL

The following elements are available on the ePLAYER1's front panel:
•
SD/SDHC slot (11): connector for SD/SDHC memory cards, up to 32GB. FAT16/32 format.
•
USB port (12): connector for USB memory devices, up to 32GB. FAT16/32 format.
•
SP/STBY LED (3): signal present/ stand-by indicator.
•
NET LED (4): network activity indicator.
•
LCD screen (1): menus display, player information, etc.
•
Digital encoder CONTROL & SELECT (2): navigation through menus, parameters selection, etc.
•
ESC key (5): escape (returns to main display). Access to lock menu (holding).
•
ENTER/MENU (6): main menu & setup menu (holding) access.
•
PREV/RW () (7): previous track in the play queue. It also allows navigation through menus.
•
STOP () (8): it stops the current reproduction.
•
PLAY/PAUSE () (9): plays/pauses the playlist/track loaded (toggled function).
•
NEXT/FF () (10): next track in the play queue. It also allows navigation through menus.
6
> Terminal – 1, 2
Terminal ⊥
>
Example of connection: GPI 2
2
.