Playing Dlna Streaming; Playing Internet Audio Streaming - Ecler ePLAYER1 Notice D'utilisation

5.3.2. Playing DLNA streaming

Audio contents can be streamed point-to-point via DLNA, connecting your device to ePLAYER1's
Wi-Fi interface (see chapter 6.4.2) or through a home Wi-Fi network (see chapter 6.4.3). DLNA is not
available for a wired Ethernet connection
First, check that your device and ePLAYER1 are in the same network. Then, press
ENTER/MENU (6) key on ePLAYER1 to access main menu. In sub-menu SOURCE, rotate CONTROL
& SELECT (2) digital encoder to select DLNA source and press it to confirm (SELECT). Parameter will
blink until selection is confirmed. The display will show the message DLNA MODE blinking. Now,
ePLAYER1 is ready to receive DLNA streams.

5.3.3. Playing Internet audio streaming

Connect ePLAYER1 to the Internet through the Ethernet port or Wi-Fi interface (see chapter 6).
Press ENTER/MENU (6) key to access the main menu. In sub-menu SOURCE, rotate
CONTROL & SELECT (2) digital encoder to select a playlist (check chapter 6 to learn how to configure
them) and press it to confirm (SELECT). Parameter will blink until selection is confirmed. Press  (9) to
start playing.
If the system cannot find/read the playlist please, check the Internet connection and/or network
configuration of the device.
r a d i o - o n l i n e . m p 3
 0 0 : 3 8
Android© device connected to ePLAYER1 for DLNA streaming
ePLAYER1 playing an Internet audio streaming
N E T
11