Installation; Location, Assembly, Ventilation; Connection To An Ac Outlet And Switching On; Audio Output Connections - Ecler ePLAYER1 Notice D'utilisation

3. INSTALLATION

3.1. Location, assembly, ventilation

ePLAYER1 has been especially designed to be installed in a standard 19" rack, taking up ½ U
(optional assembly kit for standard width rack cabinets, 1UHRMKIT).
In professional installations it is highly recommended to locate the device in the same rack as the
sound sources.
Since its power consumption is very low, forced ventilation is not necessary. However, avoid
exposing the device to extreme temperature and the environment in which it is placed should be as dry
and clean (no dust) as possible.

3.2. Connection to an AC outlet and switching on

ePLAYER1 is powered by alternating current through its external power source: 100-240 VAC and
50-60 Hz.
The atmosphere should be as dry and dust free as possible. Do not expose the unit to rain or
water splashes. Do not place liquid containers or incandescent objects like candles on top of the unit.
Should any work or connection / disconnection task be done, always disconnect the unit from the
mains supply. There are no elements that can be manipulated by the user inside the unit. To avoid
buzzing, do not allow the power cable to intertwine with the shielded cables that transport the audio signal.

3.3. Audio output connections

ePLAYER1 features 1 unbalanced stereo audio output on its rear panel.
Signal output connectors are 2 x RCA and 1 x mini-Jack stereo type.

3.4. ETHERNET port for setup and Internet connection

An RJ-45 connector allows the device to connect to an Ethernet network, and even a point-to-
point connection to a computer.
This connection enables the access to Internet contents (audio streaming), as well as the device
setup through its own embedded web application, using a web browser running in a computer, and
pointing to ePLAYER1's IP address. See chapter 6 for further information.

3.5. Wi-Fi interface port for setup and Internet connection

A Wi-Fi interface allows the device to connect to a Wi-Fi network, and even a point-to-point
wireless connection (via Wi-Fi) to a computer.
This connection enables the access to Internet contents (audio streaming), as well as the device
setup through its own embedded web application, using a web browser running in a computer, and
pointing to ePLAYER1's IP address. See chapter 6 for further information.
5