Home Wi-Fi Connection; System; Firmware Upgrade - Ecler ePLAYER1 Notice D'utilisation

6.5.3. Home Wi-Fi connection

ePLAYER1 can connect to the Internet through a home Wi-Fi network to access to the network
directions saved in the presets.
At configuration page of the Wi-Fi interface, press SCAN. Select your Wi-Fi network and enter
the password. Press SUBMIT. Press SAVE & APPLY in the next page (advance settings are available in
this page).
A home Wi-Fi wireless connection will be established.

6.6. System

SYSTEM page allows access to administrator settings: device's name, web application's
password, rebooting, restore default settings, security backups or firmware upgrade.

6.6.1 Firmware upgrade

Visit www.ecler.com to download last ePLAYER1's firmware version. Select ".bin" file through the
web application: /System/Flash Firmware. Select "Flash image...". Device will reboot with the new
firmware. To check that the firmware upgrade has been done successfully go to the setup menu
(section 5.4).
Wi-Fi settings in a Smartphone
Web application: Wi-Fi interface in client mode
Firmware upgrade via web application
19