Important Remark; Safety Precautions; Introduction - Ecler ePLAYER1 Notice D'utilisation

1. IMPORTANT REMARK

Thank you for your confidence and for choosing our streaming and local media audio player
ePLAYER1. It is VERY IMPORTANT to carefully read this manual, to fully understand its contents
before any connection in order to maximize your use and get the best performance from this equipment.
In order to guarantee the optimum operation of this unit, we strongly recommend that its
maintenance be carried out by our Authorized Technical Services.
ePLAYER1 comes with a 3-year warranty.

1.1. Safety Precautions

Do not expose the unit to rain or water splashes, and do not place liquid containers or
incandescent objects like candles on top of the unit.
Should any connection / disconnection task be done, always disconnect the unit from the mains
supply.
There are no user serviceable parts inside the unit.

2. INTRODUCTION

ePLAYER1 is a compact audio player with a stereo output that can play music contents from
local storage media (USB/SD card), Internet streams or digital sharing streams (DLNA and Airplay
compatible), with the following main features:
•
1 unbalanced stereo out, RCA and mini-Jack connector (stereo/mono selection for the
audio output).
•
Compatible audio formats: mp3, ogg, AAC, WAV, AIFF and FLAC.
•
1 USB slot and 1 SD/SDHC card slot for local media storage.
•
RJ45 Ethernet interface: setup through web application and internet streaming reception.
•
Wi-Fi interface (Client & Master mode)
•
Fully configurable through the web application (point-to-point or via Ethernet).
•
2 GPI ports (General Purpose Inputs), to trigger 2 available events.
•
Silence detection triggered event
•
Integrated RTC (Real-Time Clock) and NTP (Network Time Protocol) synchronization, up
to 240h of autonomy (without AC power).
•
Controls & indicators in front panel:
o LCD screen.
o Digital encoder for navigation through menus and parameters adjustment.
o 6 keys with pre-assigned function: ENTER/MENU, ESC, STOP, PLAY/PAUSE,
NEXT/FF and PREV/RW.
ePLAYER1's setup is done through the embedded web application. See chapter 6 for further
information.
4