Installation; Detaching And Attaching The Front Panel - Sony DSX-A500BD Mode D'emploi

Installation

Removing the protection collar and the
bracket
Before installing the unit, remove the protection
collar  and the bracket  from the unit.
1
Pinch both edges of the protection collar
, then pull it out.

2
Insert both release keys  until they
click, and pull down the bracket , then
pull up the unit to separate.


Face the hook inwards.
Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket  are bent inwards 2 mm (
in).
1
Position the bracket  inside the
dashboard, then bend the claws outward
for a tight fit.

2
Mount the unit onto the bracket , then
attach the protection collar .

Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.

Detaching and attaching the front panel

For details, see "Detaching the Front Panel"
(page 6).
182 mm (7 1 /
1
53 mm (2 / in)
8
Catch

3 /
32
in)
4
33
GB