Starting A Charge / Discharge Process - Multiplex Power Peak B7 EQ-BID 12/230 V Notice D'utilisation

6.3

STARTING A CHARGE / DISCHARGE PROCESS

there is an error, connect the values now).
etc.); an audible signal indicates the charger's status. The screen now shows the wor-
king display, which includes all the important parameters (see section 5.2).
EXPLANATION OF CHARGE MODES
Press "MODE" button three times: cycle charge. The charged battery is first discharged,
and then
Press "MODE" button four times: "STORE" mode can be used to bring Lithium batteries
Press "MODE" button five times: triple cycle. The battery is alternately discharged and
Operating Instructions
Power Peak ® B7 EQ-BID
to a defined voltage for "Winter storage".
For all Lithium batteries the charge is terminated at 60% of the
set battery capacity. The battery parameters should
therefore be set very carefully beforehand.
charged again three times.
13
41
# 30 8566