Starting Up The Charger; Setting The Unit Of Temperature; Working Display - Multiplex Power Peak B6 EQ-BID Notice D'utilisation

5.

STARTING UP THE CHARGER

12V
230V /12V
230V
Language selection must be concluded by pressing the ENTER button. The start display
shown above will then appear.
With a corresponding software update, the following languages can also be set:
5.1

SETTING THE UNIT OF TEMPERATURE

5.2

WORKING DISPLAY

Capacity
Status
Battery Current
type battery
voltage
for lithium-polymer battery, Li for lithium-ion battery, LF for lithium-ferum battery and Pb
Operating Instructions
Power Peak ® B6 EQ-BID
Connect the charger to a 12 V lead-acid bat-
tery or to the power supply unit. Ensure cor-
rect polarity when connecting (red = positive/
black = negative).
After briefly showing the device name and
the version number of the software, the start
screen appears in the display.
ton is pressed and held while connecting the supply
voltage.
The menu language can then be selected from this
display. The available languages can be selected
lowing languages are available:
To change the unit of temperature from °F to °C,
display shown opposite will then appear. The requi-
ENTER to confirm the entry.
This display provides the user with all the necessary
Time
information during a charging or discharging opera-
elapsed
tion. The status display shows the type of operation
(C for charging, D for discharging, F for finish and
alternately C/B for balancing lithium batteries) on
the top line. The charged or discharged capacity
Charging or
and the time elapsed since the start are also shown
discharging
on the top line. The type of battery (NC for nickel-
current
cadmium battery, NM for nickel-metal battery, LP
40 8
# 30 8561
-
-