Screen Displays During Charge / Discharge Processes; Screen Displays After Termination Of Charge / Discharge Processes - Multiplex MULTIcharger LN-6015 EQU Instructions

13. Screen displays during charge / discharge processes

CHG: Charging
DCH: Discharging
EQU: Indicates that the charger is equalizing the cells during the charge / discharge process.
Alternates on the screen with the CHG or DCH indicator
C D: Cyclic charging and discharging; starts with charging, ends with discharging
D C: Cyclic charging and discharging; starts with discharging, ends with charging
LP: LiPo battery
LI: LiIo battery
LF: LiFe battery
NM: NiMH battery
NC: NiCd battery
Pb: Lead battery

14. Screen displays after termination of charge / discharge processes

All displays
appear in
sequence,
alternating
with each
other.
Pressing the DATA button takes you to the DATA VIEW
screen (see Chapter 15.); pressing the START / STOP button
returns you to the menu you last used.
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten • www.multiplex-rc.de
MULTIcharger LN-6015 EQU Operating Instructions
CHG 0:03
LP+0.10A
Actual charge current (+)
or
discharge current (
CHG 55:25 00910
LP 05mA 8.417V
EQU 55:25 00910
LP 05mA 8.417V
END 55:25 00910
LP 05mA 8.417V
Charge time or
discharge time
00014
8.245V
Battery voltage currently
measured by charger
-
)
This display only appears if the balancer
socket of your battery is connected to the
EQUALIZER port of the LN-6015 EQU
during the charge process.
Charged-in
capacity
or capacity
removed
Page 20/24