SELVA MARINE Goldfish 4 Manuel D'entretien page 178

POWR
CRANKCASE AND CAMSHAFT
EXPLODED DIAGRAM
5
4
3
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name
CRANKCASE AND CAMSHAFT
REMOVAL
1 Bolt (oil seal housing)
2 Oil seal housing ass'y
3 Bolt with washer (crankcase)
4 Crankcase
5 Camshaft ass'y
CRANKCASE AND CAMSHAFT
2
1
18 Nm (1.8 m•kg, 13 ft•lb)
M8 x 50 mm
1st 10 Nm (1.0 m•kg, 7.2 ft•lb)
3
2nd 22 Nm (2.2 m•kg, 16 ft•lb)
M8 x 20 mm
Q'ty
Follow the left "Step" for removal.
1
1
7
1
1
NOTE:
When installing the camshaft, the crank-
shaft ass'y must be fitted to the cylinder
body.
Reverse the removal steps for installation.
5-26
3
4
2
5
1
7
6
Service points
E