SELVA MARINE Goldfish 4 Manuel D'entretien page 246

LOWR
3
4
6
4
9
8
DRIVE SHAFT, FORWARD GEAR AND SHIFT ROD
2
2
7
6
Stopper guide plate 2:
90890-06501
Bearing puller 3:
90890-06535
Stopper guide stand 4:
90890-06538
3. Remove:
9 Upper bushing
NOTE:
As shown, install the bushing puller in the
upper bushing, and insert the puller so
that claw hold the underside of the bush-
ing. Remove the bushing with the bushing
puller.
Stopper guide plate 2:
90890-06501
Stopper guide stand 4:
90890-06538
Bushing puller :
YB-06178 5
90890-06646 6
Bushing puller spacer 7:
90890-06648
4. Remove:
9 Lower bushing
NOTE:
Install the bushing remover attachment
and driver rod in the drive shaft lower
bushing, and remove the bushing with the
driver rod.
Bushing attachment 8:
90890-06651
Driver rod 9:
90890-06652
Pinion and forward gear inspection
1. Inspect:
9 Tooth
9 Dog
Wear/Damage ® Replace.
6-19
E