General information
Principle
The main feature of the new Active Inverter Technology is intelligent charging. This
means that the charging behaviour adapts itself automatically to the age and state of
charge of the battery. This innovation extends the battery's service life and reduces the
amount of maintenance required, while at the same time improving efficiency.
Active Inverter Technology is based on an inverter with active rectification and an intelli-
gent safety cut-out. The charging current and voltage are held constant by a digital con-
trol that is not affected by any fluctuations in the mains voltage.
Device concept
The compact design reduces space requirements and makes portable use considerably
easier. In addition to its many existing features, the charger has a modular design that
makes it easy to upgrade; it is therefore ideally equipped for future requirements. A wide
range of options is available. A voltage limit provides optimum protection for the vehicle
electronics.
Warning notices
A number of safety symbols can be seen on the charger's rating plate. The safety sym-
on the device
bols must not be removed or painted over.
52
Fronius International GmbH
Froniusstraße 1
A-4643 Pettenbach
Acctiva Smart 25A XX
Part No.:
4,010,360,xxx
Ser. No.:
xxxxxxxx
In:
~230V 50/60Hz;1120W
Out.:
DC 2V-31V/35A
xxxxxxxx
Fronius International GmbH
Froniusstraße 1
A-4643 Pettenbach
Acctiva Professional 35A XX
Part No.:
4,010,361,xxx
Ser. No.:
xxxxxxxx
In:
~230V 50/60Hz;1120W
Out.:
DC 2V-31V/35A
xxxxxxxx
Do not use the functions until you have fully read the Operating Instructions.
Possible sources of ignition, such as fire, sparks and naked flames, must be
kept away from the battery.
EMC Emission
Class A
EMC Emission
Class A