Cleaning And Maintenance - lopital Tango 5100 Mode D'emploi

4. Cleaning and maintenance

The Tango must be cleaned after every use, with water and regular household cleaning
agents. Remove excess soap residues. PUR integrated foam components with IMC coa-
ting should be rubbed clean and disinfected. Do not use any abrasive or other aggressive
cleaning products (e.g. chlorine bleach). Practical experience has shown that regular
household cleaning agents with limited alcohol content (max. 5%) are most suitable for
this purpose. The product Neoquat combi
® is recommended for disinfection purposes (on
the basis of long-term testing). If necessary, the PUR components can be cleaned with a
solution of 70% ethanol or propanol.
You must ensure that both the disinfecting and cleaning processes involve the
components being rubbed and not just submerged. The time the products must be left
on the components has a significant impact upon the lifespan of the PUR components.
As a result of the material properties of PUR, contact with sharp objects must be
avoided. This could lead to damage or tears in the material. Finally, we would like
to point out that non-critical parts of the PUR components must also be cleaned and
decontaminated.
Check the wheels regularly for hairs, dust and soap residues and remove when
necessary. Maintenance and repairs to the Tango may only be carried out by authorised
personnel.
26 | Instructions for use | Tango Shower-toilet chair