Inserting / Replacing Batteries - TOOLCRAFT LDM 15J Mode D'emploi

1. Battery status display
2. Signal strength
3. Laser indicator
4. Measurement reference
5. Unit
6. Reading

7. Inserting / replacing batteries

1. Open the battery compartment (F) on the backside.
2. Correctly insert two AAA batteries, heeding the polarity markings
inside the battery compartment.
3. Close the battery compartment again.
Replace the batteries, if the error code ERR06 appears
in the display or once all bars of the battery status
display (1) have turned off.
28
1
6
2 3
4
5