ASSEMBLY STEP 6
LOWER LINK ARM
TEFLON WASHERS (W)
EX-79 SHOWN
A
Open HARDWARE BAG 6.
B
Align end of LOWER LINK ARM with bracket on
bottom of LOWER HANDLEBAR.
NUT (Z)
C
Place TEFLON WASHERS (W) on both sides of
LOWER HANDLEBAR
the LOWER LINK ARM. While holding TEFLON
FLAT WASHER (X)
WASHERS (W) slide LOWER LINK ARM into bottom
end of LOWER HANDLEBAR.
SPRING WASHER (B)
BOLT (Y)
D
Secure the joint with 1 FLAT WASHER (X), 1
SPRING WASHER (B),1 BOLT (Y) and secure with
1 NUT (Z).
E
Repeat steps B–D on the opposite side of the
elliptical.
HARDWARE BAG 6 CONTENTS :
TEFLON
FLAT WASHER (X)
WASHER (W)
17 mm
28.4 mm
Qty: 2
Qty: 4
BOLT (Y)
70 mm
Qty: 2
ALL
SPRING WASHER (B)
15 mm
Qty: 2
MODELS
NUT (Z)
Qty: 2
17