Fitting The Display - Seca 656 Mode D'emploi Et Garantie

3. Before you start...
Unpacking
Remove the packaging and place the scale on a firm, level surface.
The scope of supply includes:
• Weighing platform
• Display head plus connecting cable
• Wall bracket
• 1 angle adapter
• 2 Screws
• 2 Rawlplugs
• 1 seca mains unit
• 1 set of operating instructions plus
declaration of conformity

Fitting the display

– Carefully put down the scale.
– Connect the connecting cable to the
electronics box.
Desk-top stand
– Position the desk-top stand on the dis-
play casing from underneath.
The broad side must be located at the
top of the display. The desk-top stand
locks in position.
– Place the display casing on a desk-top.
Model 656 19
GB