HumanTechnik InfraLight Mode D'emploi page 19

Symptom
Receiver doesn't work.
No audio signals being
received.
The audio transmission is
of poor quality, noisy,
distorted, unclear or no
audio signals being recei-
ved.
Battery pack no longer
gives the expected opera-
ting time per charge.
Cause
The receiver is not
switched on.
No battery is inserted into
the receiver.
Battery is discharged
The "line of sight" bet-
ween your transmitter and
receiver is obstructed or
you are too far
away with your receiver
from the transmitter.
Battery is discharged.
The system as used with a
Plasma TV.
Battery pack has
reached its recharging
limit.
Solution
Use the ON/OFF switch on
the back of the receiver to
switch the device on.
Insert a battery into the
receiver.
Replace battery with a
fully charged one.
Make sure that the front
side of the transmitter is
not obstructed and that it
is a free "line of sight"
transmission possibility.
Make sure you are not
located too far away from
your transmitter.
Replace battery with a
fully charged one.
Plasma TV's disturb the
infrared transmission.
Please use one of our FM
TV listening system.
Replace battery pack with
a new one.
English 19