English – 8
– You can confirm values and acknowledge informa-
tive hints.
– You can exit a dialogue.
If the on-board computer is removed from its holder
and not switched off, it will display information re-
garding the last journey, as well as status information,
on loop.
If no button is pressed after the on-board computer is
removed from the holder, it will switch itself off after
one minute.
Start page
When you fit the on-board computer in the holder
while it is switched on, it will display the start page.
b
a
k
j
i
h
g
a Time/speed indicator
b Assistance level indicator
c Lighting indicator
d Charge indicator of the eBike battery
e Unit of speed indicator
f Speed
g Navigation bar
h Motor output
i Your performance
j Average speed
k Performance evaluation
A)
Can be changed via the <Settings> status page.
1 270 U20 XBK | (21.06.2018)
c
d
e
f
A)
The a...d indicators form the status bar and are
shown on every page. If the speed is already being
displayed on the screen itself, the a indicator will
change to the current time in hours and minutes. The
status bar displays:
– Speed/time: The current speed in km/h or mph/
current time
– Assistance level: Indicates the current level of as-
sistance using a colour code
– Light: A symbol that indicates whether the light is
on
– eBike battery state of charge: Indicates the cur-
rent state of charge as a percentage
The performance evaluation k graphically displays
your current speed (white bar) in comparison to your
average speed j. The graphic shows you whether your
current speed is faster or slower than your average
speed (left of the black line = lower than average
value; right of the black line = higher than average
value).
The navigation bar g indicates which page you are on.
Your current page is highlighted. You can use the
(10) < and (8) > buttons to go to different pages.
From the initial start page, you can access the status
page via the < (10) button.
Status page
As well as the status bar, the status page also shows
you the current time and the state of charge of all your
eBike's batteries.
It may also display symbols to indicate an activated
®
Bluetooth
function or a device connected via Blue-
®
tooth
(e.g. a heart rate monitor).
You can access the <Settings> from the bottom sec-
tion.
<Settings>
You can access the settings menu via the status page.
The <Settings> cannot be accessed or changed
while riding.
Bosch eBike Systems