Bosch Kiox BUI330 Notice D'utilisation D'origine page 16

English – 14​
Code Cause
603 Internal battery fault
605 Battery temperature error
605 Battery temperature error during
charging
606 External battery fault
610 Battery voltage fault
620 Charger fault
640 Internal battery fault
655 Multiple battery faults
656 Software version error
7xx Gearbox fault
Display is Internal fault in the on-board com-
blank puter
1 270 U20 XBK | (21.06.2018)
Remedy
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
The eBike is outside the tolerable temperature range.
Switch the eBike system off to let the drive unit cool down
or warm up to a tolerable temperature. Restart the system.
If the problem persists, contact your Bosch eBike dealer.
Disconnect the charger from the battery. Leave the battery
to cool down. If the problem persists, contact your Bosch
eBike dealer.
Check the wiring. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Replace the charger. Contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Switch the eBike system off. Take the battery out and put it
back in. Restart the system. If the problem persists, con-
tact your Bosch eBike dealer.
Contact your Bosch eBike dealer and ask them to update
the software.
Please read the operating manual provided by the gearbox
manufacturer.
Switch your eBike system off and on again.
Bosch eBike Systems